K-Trail Dumper

Buying a trailer is a big investment and if you are in the market for a new dump trailer you should seriously consider the K-Trail Dumper. This galvanized trailer comes in various sizes and has a range of additional features that can be added to make the trailer better suit your specific needs.

Basic information about the K-Trail Dumpers

The tandem axle K-Trail dumpers are available in eight different sizes and the best one for you will depend on your needs and budget. The smallest trailer is 5 x 10 feet and is capable of carrying a payload of up to 8000 pounds. The largest model is 80 x 14 feet and has a payload capacity of 20,000 pounds. All eight models of the K-Trail dumper have reinforced combo doors that are either 26” or 32” high and while the standard panel height is 20.5” on the smaller models and 24” on the larger models, a 36” side extension is available. The hydraulic unit, with deep cycle battery, is housed in an aluminum box. K-Trail uses Dexter axles on all their dumpers because of their excellent quality and they offer the best warranty on the market.

previous arrow
next arrow
previous arrownext arrow
Slider
K-Trailer Dumpers are purpose-built

Dumpers are typically used to haul heavy loads and the hydraulic lift system makes it easy and efficient to unload heavy cargo like sand or gravel. The K-Trail dumper is designed and built to fulfill this purpose and each trailer has a three-section front-mounted cylinder with a piston capacity of 14 000 pounds on its smaller models and 24 000 pounds on the larger trailers. Because dumpers generally have to work hard and spend many hours on the road, the K-Trail comes with rubber-steel brushing on the leaf springs so that less maintenance is required.

The K-Trail Dump Trailer has an excellent range of features

All models of the K-Trail dumper have an excellent range of basic features. The trailers come standard with 4 D-rings, radial tires, industrial slipper suspension, LED lights and tread plate fenders with step plates and ramp holders welded to the heavy-duty jacks. All the dumpers include a tarp and roller with a bearing system and hooks for a rear tarp. K-trail also makes fenders, rear tail lightboxes and jacks bolted on instead of welded in case of the need to replace a damaged piece. This option is a good idea because you will not be cutting into the galvanizing and losing that original coating. And if that is not enough, buyers can also ask for a range of extra accessories that can be added to their K-Trail dumper to make it better suit their specific needs.

There are plenty of reasons to buy a K-Trail dumper from McFarlane’s

When you buy a K-Trail dumper from us it comes with a five-year warranty and we also offer a comprehensive range of accessories and spare parts; making trailer repairs and maintenance easy and convenient. Our skilled personnel are always on hand to provide assistance and offer advice. Contact McFarlane’s today for all your trailer needs.

Model D510-10-PS*
Doors action Combo
Cylinder stroke 90″
Piston capacity 14 000 lb
Interior width 60″
Interior length 120″
Total width 81″
Total length 186″
Tare weight 2 100 lb
Payload 8 000 lb
Panel height 20 1/2″
Front panel and door height 26″
GAWR 2 x 5 200 lb
Tires 225/75/R15 (8 ply )
Coupler 2 5/16″
Frame 2” x 5” x 3/16″
Crossmembers C3
Model D610-10-PS*
Doors action Combo
Cylinder stroke 90″
Piston capacity 14 000 lb
Interior width 72″
Interior length 120″
Total width 93″
Total length 186″
Tare weight 2 335 lb
Payload 8 000 lb
Panel height 20 1/2″
Front panel and door height 26″
GAWR 2 x 5 200 lb
Tires 225/75/R15 (8 ply )
Coupler 2 5/16″
Frame 2” x 5” x 3/16″
Crossmembers C3
Model D612-10-PS*
Doors action Combo
Cylinder stroke 108″
Piston capacity 14 000 lb
Interior width 72″
Interior length 147″
Total width 93″
Total length 228″
Tare weight 2 800 lb
Payload 7 800 lb
Panel height 20 1/2″
Front panel and door height 26″
GAWR 2 x 5 200 lb
Tires 225/75/R15 (8 ply )
Coupler 2 5/16″
Frame 2” x 5” x 3/16″
Crossmembers C3
Model D8012-10-PS
Doors action Combo
Cylinder stroke 108″
Piston capacity 14 000 lb
Interior width 80″
Interior length 147″
Total width 101″
Total length 228″
Tare weight 3 000 lb
Payload 7 600 lb
Panel height 20 1/2″
Front panel and door height 26″
GAWR 2 x 5 200 lb
Tires 225/75/R15 (8 ply )
Coupler 2 5/16″
Frame 2” x 5” x 3/16″
Crossmembers C3
Model D8012-14-PS
Doors action Combo
Cylinder stroke 108″
Piston capacity 14 000 lb
Interior width 80″
Interior length 147″
Total width 101″
Total length 228″
Tare weight 3 440 lb
Payload 11 000 lb
Panel height 24″
Front panel and door height 32″
GAWR 2 x 7 000 lb
Tires 235/80/R16 (10 ply)
Coupler 2 5/16″
Frame 2” x 6” x 1/4 “
Crossmembers C3
Model D8014-14-PS
Doors action Combo
Cylinder stroke 120″
Piston capacity 24 000 lb
Interior width 80″
Interior length 168″
Total width 101″
Total length 252″
Tare weight 3 880 lb
Payload 11 000 lb
Panel height 24″
Front panel and door height 32″
GAWR 2 x 7 000 lb
Tires 235/80/R16 (10 ply)
Coupler 2 5/16″
Frame 2” x 6” x 1/4 “
Crossmembers C3
Model D8016-14-PS
Doors action Combo
Cylinder stroke 144″
Piston capacity 24 000 lb
Interior width 80″
Interior length 196″
Total width 101″
Total length 276″
Tare weight 4 275 lb
Payload 10 700 lb
Panel height 24″
Front panel and door height 32″
GAWR 2 x 7 000 lb
Tires 235/80/R16 (10 ply)
Coupler 2 5/16″
Frame 2” x 6” x 1/4 “
Crossmembers C3
Model D8016-21-PS
Doors action Combo
Cylinder stroke 144″
Piston capacity 24 000 lb
Interior width 80″
Interior length 196″
Total width 101″
Total length 276″
Tare weight 4 500 lb
Payload 18 000 lb
Panel height 24″
Front panel and door height 32″
GAWR 3 x 7 000 lb
Tires 235/80/R16 (10 ply)
Coupler 2 5/16″
Frame 2” x 6” x 1/4 “
Crossmembers C3